The system designed to assist the driver when parking a vehicle and prevent unnecessary damage to the bodywork, as well as warning of approaching hazards and threats. The Laser Pro Park will increase your driving pleasure and keep you and your vehicle safe from unnecessary damage for many years to come. The brighter the surface the further the distance the Laser Pro Park will detect – up to 3 meters away.

The harness for the Laser Pro Park has the on/off switch, buzzer, mute button, and visual LED to give you control and warnings of impending danger or interference from other laser systems. In order to avoid interference with other laser based systems the Laser Pro Park has been designed to alert the driver of possible interference & if necessary, switch the system down.

The Junction box for the Laser Pro has 2 sensor ports should you require a sensor on the rear and the front of the car, an interface module to the wire harness, and a USB port for upgrading the unit if and when required.

The Laser Pro Park uses only the highest quality lasers and lenses, giving huge advantages to both reception and coverage. The unit is supplied with a single laser sensor which can be fitted to either the front or the rear of the vehicle, additional laser sensor heads are available which plug in to the same junction box to extend the area coverage of your Laser Pro Park.

The unit uses the license free 904nm laser frequency. The same frequency as used by several motor manufacturers eg. Nissan’s adaptive cruise control system which uses laser to determine the distance immediately in front of the vehicle and to deactivate the cruise control if the stopping distance is considered to be too short.

Disclaimer: The Laser Pro Park may interfere with other laser systems. If Laser Pro Park detects that it is interfering with another type of laser system it will automatically shut itself down after a preset time. It will turn itself back on after 60 seconds.